HDMI HDbaseT Network Extender

HDMI Network Extender HD Lossless Uncompressed Digital Network Transmitter 70 / 130m Network HD Signal Transmission Equipment

 

 HDMI Network Extender Feature

1.It is an extender product for transmitting HDMI 1.4 HD video signal through six kinds of network cables, which can effectively extend the network transmission distance and break the limit of traditional Ethernet transmission distance within 330 feet.
2.Support 4K * 2K @ 30Hz resolution transmission, downward compatible with low resolution.
3.When the resolution of HDMI interface is 4K * 2K @ 30Hz, it supports cat.6 or cat.7 with a maximum length of 130 feet.
4.The standard HDBaset transmission protocol is adopted,with long transmission distance,fast speed,no compression of video signal,clear and smooth picture quality, reliable performance, strong stability, low failure rate. The fan free and low power consumption design can effectively reduce the construction difficulty and after-sales cost.
5.HDBaset standard supports power POE of network cable, and only needs to supply 12V power for a single (Tx / Rx) HDBaset device.
6.Adopt full hardware design architecture, plug and play, without any software driver.

HDMI HDBaseT Network ExtenderSpecifications

BIT-Ex-HDBT-4K-70 Details
Video Type agreement HDMI1.4 / HDMI1.2
Pixel bandwidth 165MHz/330MHz
Interface bandwidth The total bandwidth is 10.2Gbps
Maximum resolution supported 4k*2k@30Hz
Interface DVI-I
DVI Max I / O distance Less than 16 feet
RS-232 Interface Industrial terminal
Signal direction Bidirectional transmission
Baud rate Adaptive, up to 115200bps
Data bits 8 bits
Mesh port Interface Standard RJ45 interface
Recommended maximum transmission distance 1080p: CAT6 230 / 330 feet
4K * 2K: CAT6 130 feet
Other Power DC 12V/1A
Maximum power consumption 6W
Temperature Working temperature:-5℃~+70℃
Humidity Working humidity:5%~90%
Outline size 105*76*27mm
Quality assurance One year
 

 HDMI Network Extender Product connection diagram

extender product for transmitting HDMI 1.4

Product connection diagram

1) The signal source (computer, camcorder, DVD / DVE, hard disk player, etc.) HDMI output is connected to the DVI input interface of the extender transmitting end (TX).
2) TX (Transmit) is the transmitting end.
3) The network cable connects the transmitting end (TX) and the receiving end (RX).
4) RX (Receive) is the receiving end.
5) The receiving end (RX) is connected to a display device (LCD TV, projector, digital signage, advertising machine, etc.).
6)  The extender device is connected to 12V power supply.
7) If the display device has an image output, the connection is successful.