100m 4K HDMI Extender
4K HDMI HDBaseT Extender It is an extender product for transmitting HDMI 1.4 HD video signal through six kinds of network cables, which can effectively extend the network transmission distance and break the limit of traditional Ethernet transmission distance within 330 feet.Support 4K * 2K @ 30Hz resolution transmission, downward compatible with low resolution.
4K HDMI Extender Feature1．It is an extender product for transmitting HDMI 1.4 HD video signal through six kinds of network cables, which can effectively extend the network transmission distance and break the limit of traditional Ethernet transmission distance within 330 feet.
2．Support 4K * 2K @ 30Hz resolution transmission, downward compatible with low resolution.
3．When the resolution of HDMI interface is 4K * 2K @ 30Hz, it supports cat.6 or cat.7 with a maximum length of 130 feet.
4．The standard HDBaset transmission protocol is adopted,with long transmission distance,fast speed,no compression of video signal,clear and smooth picture quality, reliable performance, strong stability, low failure rate. The fan free and low power consumption design can effectively reduce the construction difficulty and after-sales cost.
5．HDBaset standard supports power POE of network cable, and only needs to supply 12V power for a single (Tx / Rx) HDBaset device.
6．Adopt full hardware design architecture, plug and play, without any software driver.
4K HDMI HDBaseT Extender Specifications
|Video||Type agreement||HDMI1.4 / HDMI1.2|
|Interface bandwidth||The total bandwidth is 10.2Gbps|
|Maximum resolution supported||4k*2k@30Hz|
|DVI Max I / O distance||Less than 16 feet|
|Signal direction||Bidirectional transmission|
|Baud rate||Adaptive, up to 115200bps|
|Data bits||8 bits|
|Mesh port||Interface||Standard RJ45 interface|
|Recommended maximum transmission distance||1080p: CAT6 230 / 330 feet|
|4K * 2K: CAT6 130 feet|
|Maximum power consumption||6W|
|Quality assurance||One year|
4K HDMI HDBaseT Extender connection diagram1) The signal source (computer, camcorder, DVD / DVE, hard disk player, etc.) HDMI output is connected to the DVI input interface of the extender transmitting end (TX).
2) TX (Transmit) is the transmitting end.
3) The network cable connects the transmitting end (TX) and the receiving end (RX).
4) RX (Receive) is the receiving end.
5) The receiving end (RX) is connected to a display device (LCD TV, projector, digital signage, advertising machine, etc.).
6) The extender device is connected to 12V power supply.
7) If the display device has an image output, the connection is successful.